ALT KEY handling in a SubClassed Button

[BOB MECHLER]

Thanks,

Admittedly, I'm trying to usurp the work of the OS with my own message loop. It's clear I don't have complete command of what it takes to handle more than one dialog using custom message pumps.


Bob Mechler

[Dominic Mitchell]

I will have to do a long post for the benefit of lurkers because I still don't think you need to do the work of the OS.
By the way, the code in your post will never work even if you were to replace WM_KEYUP with WM_SYSKEYUP or WM_SYSCHAR.

You can do one of the following:

1) SetWindowsHookEx(WH_GETMESSAGE)
2) Process keys in message loop
3) Process WM_GETDLGCODE
4) Turn off default dialog box keyboard handling(don't call IsDialogMessage)

I will post explanations and code at a later date.

[BOB MECHLER]

This is my subclassed Dialog Confirmation y/n that is generic and self sizing based on the message passed. This code sets focus on the default button whether Yes or No and makes sure the broken line box is there (sometimes it's not). It handles the return key and throws it away.

Why do this?

In my main dialog I heavily trap many different keys for branching to lookup routines and/or dup functions. As each textbox gets focus it uses a message pump that will allow responding to any key as a field exit key if that key is setup to be a field exit key. Once the field is exited the key that was pressed is used by the program to call a dialog that presents a listbox of choices for the field or the exit key might fill in the field with default information and go on to the next field.

Other times when return is pressed I normally just go to the next field and re-enter the message pump afresh. Many times the information in the field is not valid or some other combination of fields causes a warning box to be needed.

At that point I pop up a dialog that informs the user of the problem and requires a yes/no answer and is supposed to stay in the field that caused the problem. If I don't throw away the return key it gets processed by the underlying field and it moves to the next field. Anyway, the code below successfully throws away the return and handles the button clicks.



But now the ALT Y and ALT N need to respond.

      GLOBAL V_YNMSG$,CUST_ERMSG_DEPTH AS INTEGER
      MACRO mSC_Set(phDlg, phCtl, pProc)
      		SetWindowLong GetDlgItem(phDlg, phCtl), %GWL_USERDATA, _
      				SetWindowLong(GetDlgItem(phDlg, phCtl), %GWL_WNDPROC, CODEPTR(pProc))
      END MACRO
      MACRO mSC_Kill(phCtl)
      		SetWindowLong(GetDlgItem(CBHNDL, phCtl), %GWL_WNDPROC, _
      				GetWindowLong(CBHNDL, %GWL_USERDATA))
      END MACRO
      MACRO mSC_OrgProc
      		FUNCTION = CallWindowProc(GetWindowLong(phWnd, %GWL_USERDATA), phWnd, pdMsg, pWParam, pLParam)
      END MACRO    
      FUNCTION YNSubClassProc(BYVAL phWnd AS DWORD, BYVAL pdMsg AS DWORD, BYVAL pWParam AS DWORD, BYVAL pLParam AS LONG) AS LONG
        SELECT CASE pdMsg
          CASE %WM_KEYUP
            IF pWParam = 13 THEN               
              SELECT CASE GetDlgCtrlID(phWnd)
                CASE 2 
                  V_YESNO$ = "Y"
                CASE 3
                  V_YESNO$ = "N"
              END SELECT                
              V_YNDEF = 0
              DIALOG END GetParent(phWnd),0
            END IF
          CASE %WM_LBUTTONDOWN
            SELECT CASE GetDlgCtrlID(phWnd)
              CASE 2 
                V_YESNO$ = "Y"
              CASE 3
                V_YESNO$ = "N"
            END SELECT 
            V_YNDEF = 0
            DIALOG END GetParent(phWnd),0
        END SELECT
        mSC_OrgProc
      END FUNCTION
      CALLBACK FUNCTION YesNoMsgbxproc 
        DIM sCBCTL AS LONG
        SELECT CASE AS LONG CBMSG
            CASE %WM_INITDIALOG 

              IF V_YNDEF = 2 THEN
                KeyBd_Event %VK_RIGHT, MapVirtualKey(%VK_RIGHT, 0), 0, 0: SLEEP 0
              ELSEIF V_YNDEF = 1 THEN
                KeyBd_Event %VK_RIGHT, MapVirtualKey(%VK_RIGHT, 0), 0, 0: SLEEP 0
                KeyBd_Event %VK_LEFT, MapVirtualKey(%VK_LEFT, 0), 0, 0: SLEEP 0
              END IF
              ' Initialization handler
              '
              SetWindowPos CBHNDL,%HWND_TOPMOST,0,0,0,0,%SWP_NOMOVE OR %SWP_NOSIZE
            CASE %WM_DESTROY  
              mSC_Kill(2)
              mSC_Kill(3)
            CASE %WM_NCACTIVATE
                STATIC hWndSaveFocus AS DWORD
                IF ISFALSE CBWPARAM THEN
                    ' Save control focus
                    hWndSaveFocus = GetFocus()
                ELSEIF hWndSaveFocus THEN
                    ' Restore control focus
                    SetFocus(hWndSaveFocus)
                    hWndSaveFocus = 0
                END IF
            CASE %WM_SIZE
              IF IsIconic(CBHNDL) THEN
                DIALOG SHOW STATE hdlg,%SW_HIDE
              ELSE
                DIALOG SHOW STATE hdlg,%SW_SHOW
              END IF
            CASE %WM_COMMAND 
        END SELECT
      END FUNCTION
      SUB YesNoMsgbx                   
        DIM msg as tagmsg,loopcnt AS LONG,hCtrl2 AS STATIC LONG,hCtrl3 AS STATIC LONG
        ALT_ERMSG_DEPTH = 0
        ERMSG_DEPTH = (LEN(V_YNMSG$) / 35) * 10 + 10
        IF ERMSG_DEPTH < 10 THEN ERMSG_DEPTH = 10
        IF INSTR(V_YNMSG$,CHR$(10)) > 0 THEN
          ALT_ERMSG_DEPTH = PARSECOUNT(V_YNMSG$,$LF) * 8
        END IF
        IF ALT_ERMSG_DEPTH > ERMSG_DEPTH THEN
          ERMSG_DEPTH = ALT_ERMSG_DEPTH
        END IF
        IF CUST_ERMSG_DEPTH > 0 THEN
          ERMSG_DEPTH = CUST_ERMSG_DEPTH
          CUST_ERMSG_DEPTH = 0 'reset
        END IF
        IF V_YNSIZ < 150 THEN V_YNSIZ = 150
        DIALOG DISABLE hdlg
        DIALOG NEW 0,"User option",,,V_YNSIZ ,ERMSG_DEPTH + 50, %WS_SYSMENU,0 TO YesNoMsgBox&
        CONTROL ADD LABEL,YesNoMsgBox&,10,V_YNMSG$,10,10,V_YNSIZ - 20,ERMSG_DEPTH,%SS_CENTER,%WS_EX_LEFT OR %WS_EX_STATICEDGE
        CONTROL SEND YesNoMsgBox&, 10, %WM_SETFONT, hFontText, %True
        IF V_YNDEF = 1 THEN
          CONTROL ADD BUTTON,YesNoMsgBox&,2,"&Yes",V_YNSIZ/2 - 50,ERMSG_DEPTH + 13,40,14,%BS_CENTER OR %BS_VCENTER,%WS_EX_LEFT
          CONTROL ADD BUTTON,YesNoMsgBox&,3,"&No",V_YNSIZ/2 + 10,ERMSG_DEPTH + 13,40,14,%BS_CENTER OR %BS_VCENTER,%WS_EX_LEFT
          CONTROL SEND YesNoMsgBox&, 2, %WM_SETFONT, hFontText, %True
          CONTROL SEND YesNoMsgBox&, 3, %WM_SETFONT, hFontText, %True
          CONTROL SET FOCUS YesNoMsgBox&, 2
          CONTROL REDRAW YesNoMsgBox&,2
        ELSEIF V_YNDEF = 2 THEN
          CONTROL ADD BUTTON,YesNoMsgBox&,2,"&Yes",V_YNSIZ/2 - 50,ERMSG_DEPTH + 13,40,14,%BS_CENTER OR %BS_VCENTER,%WS_EX_LEFT
          CONTROL ADD BUTTON,YesNoMsgBox&,3,"&No",V_YNSIZ/2 + 10,ERMSG_DEPTH + 13,40,14,%BS_CENTER OR %BS_VCENTER,%WS_EX_LEFT
          CONTROL SEND YesNoMsgBox&, 2, %WM_SETFONT, hFontText, %True
          CONTROL SEND YesNoMsgBox&, 3, %WM_SETFONT, hFontText, %True
          CONTROL SET FOCUS YesNoMsgBox&, 3
          CONTROL REDRAW YesNoMsgBox&,3
        END IF 
        mSC_Set(YesNoMsgBox&,2,YNSubClassProc)        

        mSC_Set(YesNoMsgBox&,3,YNSubClassProc)        
        DIALOG SHOW MODAL YesNoMsgBox&  CALL YesNoMsgbxproc 
        SetForeGroundWindow hdlg
        V_YNSIZ = 150            
        DIALOG ENABLE hdlg

      END SUB

[Michael Mattias]

As Mr. Mitchell notes.....
>duplicate the work.......

CONTROL ADD  BUTTON .... "[B][COLOR="Red"]&[/COLOR][/B]help"

Alt+H clicks this button.

[Dominic Mitchell]

Why are you trying to duplicate the work of the Dialog Box Manager/IsDialogMessage function?

What you are attempting is possible, but before I provide an answer I would like to know why you need to do this for a button.

[Chris Holbrook]

Bob, would VkKeyScanEx help?

[BOB MECHLER]

I've searched my poffs, maybe I'm not giving the right search key, but I can't find an example of trapping say 'Alt Y' or 'Alt N' so I can simulate the button click. I've got enter clicking the currently focused button and button clicking all working in the sub class.

Bob Mechler