Announcement

Collapse
No announcement yet.

Internal PB/DLL String EQUATES

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Internal PB/DLL String EQUATES

    For those who need them, this is a list of predefined internal
    PB/DLL string EQUATES. The PB/DLL online Help file doesn't list
    them. I "discovered" them in my PB/DLL printed manual, which I
    special ordered when I ordered the PB/DLL product.

    Here's the list:

    $NUL CHR$(0) NUL
    $BEL CHR$(7) Bell
    $BS CHR$(8) Back Space
    $TAB CHR$(9) Horizontal Tab
    $LF CHR$(10) Line Feed
    $VT CHR$(11) Vertical Tab
    $FF CHR$(12) Form Feed
    $CR CHR$(13) Carriage Return
    $CRLF CHR$(13, 10) Carriage Return & Line Feed
    $EOF CHR$(26) End Of File
    $ESC CHR$(27) Escape
    $DQ CHR$(34) Quotation Mark (double - ")

    I can't certify the validity of these EQUATES, as the only
    three that I've used in my own coding have been $CR, $CRLF, and
    $DQ. However, they should be good, as the printed manual was
    created by PowerBASIC, Inc.

    Enjoy!


    ------------------
    Clay C. Clear

    http://www.v3space.com/a/a39/202/

    [email protected]
    [email protected]

  • #2
    Clay, you may wish to take a tour through the Errata postings in the FAQ forum... you'll find these listed, and a couple of dozen other notes/errata for the PB/CC and PB/DLL documentation.



    ------------------
    Lance
    PowerBASIC Support
    mailto:[email protected][email protected]</A>
    Lance
    mailto:[email protected]

    Comment


    • #3
      OK, Lance, will do that tomorrow. Thanks for the tip!


      ------------------
      Clay C. Clear

      http://www.v3space.com/a/a39/202/

      [email protected]
      [email protected]

      Comment

      Working...
      X